Installation

KOOLIO installation: step by step

KOOLIO monoblock air conditioning offers indoor comfort without a separate outdoor unit. Here’s an overview of the installation process.

1. Choose the position and mark out

Your installer selects a suitable external wall, checks its strength and looks for concealed pipes or cables. Using the installation template, they mark the fixing points and ventilation openings, allowing the clearances required for airflow and maintenance.

2. Prepare the wall

Two ventilation openings are drilled through the external wall in the positions shown on the template. The installer also prepares the mounting points and any condensate drainage required for your model.

3. Fit the ventilation sleeves

Wall sleeves are fitted into the openings and adjusted to suit the wall thickness. These form the air passages between the unit and the outside.

4. Secure the external grilles

The external ventilation grilles are fitted and secured, with the sleeves and openings sealed as specified in the installation manual.

5. Mount, connect and test

The mounting bracket is secured and the unit positioned on it. Your installer completes the required drainage and electrical connections, then checks operation, airflow and drainage before demonstrating the controls.

Installation information

This is an overview, not a substitute for the model’s installation manual. Installation should be completed by a suitably qualified installer, following the specified hole sizes, clearances, fixing requirements and electrical instructions.